WORLD’S COATING INNOVATOR™
OFFICIAL MANUFACTURER’S WEBSITE
WORLD’S COATING INNOVATOR™
OFFICIAL MANUFACTURER’S WEBSITE

Coating Products

Thermal Insulation Coatings

Superior Products International II Inc. Certified Coating

Super Therm®

Ceramics Heat Block Insulation Coating – Blocks 96.1% of the Total Solar Heat

Super Therm® is the only NASA collaborated insulation coating in the world. It is a water-borne combination of high-performance aliphatic urethanes, elastomeric acrylics, and resin additives which produces a tough, yet flexible coating film that’s been in protecting the planet since 1989 from the sun’s harsh heat. Designed for performance and durability, Super Therm® contains 4 unique ceramics to block up to 96.1% of the total solar radiational heat entering a structure from Visual Light, Ultra Violet (UV), and Infrared (IR) – We Get Heat! Super Therm® is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof (eliminate thermal shock) and prevent corrosion and surface deterioration as well as reduce carbon emissions through less power consumption to remain cool > More Info >


Sunshield Heat Reflective Paint logo

Sunshield

More than just a Heat Reflective White Paint – Blocks 85% of Solar Heat
Sunshield is not developed, designed, or intended for commercial and industrial use

Sunshield is a water-borne combination of high-performance duo of elastomeric acrylics and resin additives, which produces a tough, yet flexible coating film. It combines four different ceramics that provide both heat reflectivity and heat-blocking properties. Sunshield is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof. Sunshield’s blend of resin additives produce a flexible coating membrane that can be applied directly to any surface. It also prevents corrosion and surface deterioration. Although durable and offering solar blocking performance, Sunshield does not give the same benefits as Super Therm®.  More Info >


HPC Coating logo

HPC® Coating

Get “High” Heat Insulation and Protection that Stops CUI

  • HPC® Coating – Ambient up to 204°C / 400°F
  • HPC®-INT Coating – 204°C / 400°F up to 426°C / 800°
  • HPC®-HT Coating – 426°C / 800°F up to 650°C / 1200°F

HPC® Coating, HPC®-INT Coating and HPC®-HT Coating is a single component water-based coating designed to insulate hot pipes or surfaces that load up to 650°C. The coating is not a reflective coating but an insulation coating and works to block or hold the loading of higher heats and to resist the transfer of heat through the coating to the cooler side. Holds heat in the surface in which it covers. Once coated, the surface should be equal to the interior temperature. HPC®-HT Coating has been successfully applied to hot pipe surfaces around 650°C. More Info >


HSC® Coating

Get “High” Heat Protection that Surpasses Conventional Insulation

HSC® Coating is designed to control heat transfer on surface temperatures up to 350°F / 176°C. It is water-borne, and extremely lightweight and smooth in appearance. HSC® Coating uses a special acrylic resin7. blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HSC® Coating offers a “Green”, non-flammable, non-toxic formula for medium heat surface applications over standard steam pipe or oven wall construction. The coating was originally designed for hot applications where temperature exposures fall below those that would require the use of HPC® Coating. HSC® Coating is more easily applied for a smooth finish. It can be applied over metal, concrete, wood, and other substrates. More Info >


Fire Coating

Omega Fire™ logo

Omega Fire

A Coating Designed to Withstand 1200°C Direct Flame and Heat Transfer

Omega Fire is a single component coating having a blend of seven different ceramics combined in a water-based, acrylic/hybrid modified silicone formula to create a barrier against extreme flame impingement and heat migration. The coating can withstand direct flame up to 2200°F / 1204°C by hardening on the surface at first contact, while continuing to provide the necessary insulation value. The resin blend binds the compounds together and forms a char causing a matrix with the ceramics across the face of the coating, facing the flame. Omega Fire is designed to stay intact with constant adhesion at extreme temperatures, while remaining flexible. In this way, it can move with the surface, during expansion and contraction, without cracking and falling off as the substrate moves. More Info >


Corrosion Coatings

Rust Grip® logo

Rust Grip®

The World’s Toughest Encapsulation Coating

Rust Grip® is a single component urethane formula applied directly to rust or blasted metal surfaces. 6780 psi surface tensile strength. Pull test results in the field and lab average 1200 psi and in the field over blasted surface at 2200 psi. Extremely tough, anchors itself inside the pores of the metal surface or surface rust to block moisture and air from developing corrosion. Simple to use and extremely effective against all corrosive environments. Applied only to completely dry surfaces. More Info >


Rust Grip-E®

Tough coating aimed to maintain excellent adhesion to prevent corrosion

Rust Grip-E is a two-part epoxy coating system that has been designed with specific additives to promote adhesion when used on metal and contains metal pigment to strengthen coating and retard chalking. Rust Grip-E was developed to be applied to metal surfaces that cannot be dry enough to use traditional Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and metal. Rust Grip-E must be top-coated to prevent chalking. More Info >


Moist Metal Grip

The Ideal Protection in Harsh, Wet Environments

Moist Metal Grip is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. Moist Metal Grip was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood. More Info >


Industrial Sealant Coatings

Enamo Grip logo

Enamo Grip

The Ultimate Protection Coating

Enamo Grip is a two-part aliphatic polyurethane enamel available in clear and colors. It forms a uniquely hard and durable coating film, which demonstrates unsurpassed semi-gloss and color retention, as well as chalk resistance when used in exterior applications. It is resistant to water and humidity, stains, acids, solvents, and chemicals, as well as having tremendous scuff, mar and impact resistance. Enamo Grip will self-level to an even and smooth finish. More Info >


Enamo Grip 5000

Enamo Grip 5000 is a two component polyester high solids coating for protection against vapors, acid rain, and other harsh chemical environments while giving a car-like finish and UV protection. Can withstand Skydrol® hydraulic fluids used in aircraft when applied to flooring. Available in clear and custom colors. More Info >


Lining Kote logo

Lining Kote UHS

Protect Against the Harshest Acids, Chemicals and Solvents

Lining Kote UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed to for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments. Lining Kote UHS has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity and high heat. Lining Kote UHS is made with a high molecular weight base and cure for strength and durability. More Info >


General Sealant Coatings

SP APC Strippable

APC Strippable Base is a single component, water- based coating designed to be a strippable base for bare or painted metal, painted concrete, masonry, high-density plastic and wood. It offers a dual ability to adhere to a surface and to have a top-coat applied, while allowing itself to be sliced to break the surface tension and be removed months or years later. More Info >


SP HT Metal Sealer

SP HT Metal Sealer is a single component water-based coating using specific ceramic fiber loads to prevent corrosion and CUI for application directly on high heat metal surfaces at temperatures of 392°F/200°C to 1112°F/600°C. The coating must be applied while the surface is hot to achieve dry down and full curing. More Info >


SP Interlock

Stone and Concrete Sealant…Perfect for Treating Salt Damp

SP Interlock is a concrete “conditioner” for use on aged and weathered concrete. It is a combination of non-acidic water-soluble agents, which penetrate through the open pores. Once absorbed, SP Interlock works to replace lost solids within a concrete surface before being over-coated with Rust Grip®, Enamo Grip, or other coatings. More Info >


SP Liquid Membrane®

SP Liquid Membrane is a tough, one-part elastomeric hydrocarbon rubber compound coating that is loaded with a ceramic pigment for strength. Upon curing, SP Liquid Membrane provides a protective coating film of superior adhesion and flexibility, and is resistant to abrasion and impact. SP Liquid Membrane can be used as a primer, as a one-coating system or as a topcoat to seal Super Therm® from ponding water. SP Liquid Membrane can be applied over pressure-washed substrate of TPO, EPDM, PVC, wood, concrete or metal. More Info >


SP Seal Coat

SP Seal Coat is a one component coating that combines three high performance water-borne resins. The coating is designed using a high quality elastomeric and a self-cross-linking resin system for long life and weathering, as well as against water that ponds, and having good dirt release. SP Seal Coat is used as a topcoat over Super Therm®, HPC® Coating or other base materials. It remains flexible and is resistant to mold and mildew. SP Seal Coat can be applied over most firmly bonded paints or foams. Allow the base coat to dry before applying the SP Seal Coat. More Info >


SP Seal Coat HT

SP Seal Coat HT is a single-component hybrid resin, water-based coating using specific ceramic loads for application directly over HPC® Coating to seal and face up to 500°F / 260°C. It was designed to provide a seal for HPC® Coating to block water/moisture absorption and seal the surface. HPC® Coating offers a ‘green’, nonflammable, non-toxic formula for surface applications. SP Seal Coat HT is easily applied and can be applied direct to HPC® Coating. It will give additional protection for CUI development. More Info >


SP Texture Coat

SP Texture Coat is a mixture of high-performance ceramics and acrylics specially blended for breathability, adhesion, flexibility, and toughness. Additional lightweight aggregate compound is added into the formulation to insure a texture yet having added characteristics not found in standard dry mix ratios of stucco. SP Texture Coat is tested to show a low permeability and is not affected by water or moisture-penetration. It is designed to stay down for a long bonding life. It will not crack and peel. It is UV-protected for long life and durability against weathering whether in hot or cool climates, or whether in high humidity or very dry environments. More Info >


SP Wood Box Paint

Wood Box Paint is a one-component coating that combines a high performance acrylic with IR- and UV-blocking ceramics in a water-borne formulation. The coating is designed using a high quality, breathable elastomeric resin system for long life and weathering, and is used to coat wooden work boxes in desert settings. It remains flexible, but tough. More Info >


Super Base HS

Used to Fill and Seal Cracks and Breaks in the Roof Substrate

Super Base HS is a one-part water-based acrylic coating that is easily applied without environmental concerns, and used as a base coat for either Super Therm® or Sunshield. Super Base HS can be used as a base coat to seal tar, asphalt, shingles, rubber, concrete, or wood roofs. More Info >

Globally Accredited Coatings

Connect and Contact SPI

    How did you find out about us?