SP Texture Coat is a mixture of high-performance ceramics and acrylics specially blended for breathability, adhesion, flexibility, and toughness. Additional lightweight aggregate compound is added into the formulation to insure a texture yet having added characteristics not found in standard dry mix ratios of stucco. SP Texture Coat is tested to show a low permeability and is not affected by water or moisture-penetration. It is designed to stay down for a long bonding life. It will not crack and peel. It is UV- protected for long life and durability against weathering whether in hot or cool climates, or whether in high humidity or very dry environments.


  • More information coming soon.


Product Chemistry Water, Acrylic and Ceramic based
Volume Solids 77.8%
VOC Level 1.16 lbs/gal;124 g/L
Dry Time (at 70˚F) 1-3 hours to tack free
Full Cure 7 days

Typical Uses

SP Texture Coat was designed to coat a variety of surface structures on metal, wood, stone, concrete, fiberglass or composites. SP Texture Coat breathes, and unlike standard stucco, can flex with the substrate without cracking, giving years of maintenance-free service. SP Texture Coat will not allow water to penetrate and damage substrates. It has a mildew resistant agent in the formula to guard against the growth of mold and mildew. When top-coated with Super Therm to guard against solar radiation heat absorption, the system created provides an insulating effectiveness on exterior walls and will not detract from the texturing.

Application Methods

Surfaces must be clean and dry before application. Any loose or flaking old paints or corrosion must be removed from the surfaces before applying. Pressure-wash is done if possible to remove grease, oil, waxy substances, dirt, salts, etc. SP Texture Coat can be applied by trowel or a Graco GTX 2000EX.

Resources & Downloads

Product Information