Heat Management
Our expertise in heat management started with Super Therm. Our research into ceramic compounds discovered the secret to heat load and heat blocking. This research produced HPC and HPC HT which are water-based coatings applied while in operation to pipes, tanks, vessels of all types to hold the heat on the surface of the unit to help increase the interior temperature and pressure for a greatly improved efficiency.
This type of technology is designed to not allow the releasing of all the heat off the surface as with standard insulation materials to be absorbed and slowly released to the atmosphere. Holding the temperature on the surface stops most of the heat loss which is captured to the interior where it belongs. Engineering understands that if you increase the interior temperature, this heat will increase the pressure which increases the heat to a higher level.
Super Therm®
Super Therm® Ceramic Coating blocks 96.1% of heat – 99% BTU Rating Tested
Super Therm® is an energy efficient product and is the most highly advanced solar heat block ceramic coating system available today that lasts over 20 years. No other product can claim a 99.5% heat block. It’s properties will perform under the harshest of conditions saving you valuable time and money thanks to a greatly reduced need for roof repair and/or replacement. The product literally extends of the life of roofs and structures. > Learn More >
HPC® Coating
Get “High” Heat Insulation and Protection that Stops CUI
- HPC® Coating – Ambient up to 204°C / 400°F
- HPC®-INT – 204°C / 400°F up to 426°C / 800°
- HPC®-HT – 426°C / 800°F up to 650°C / 1200°F
HPC® Coating, HPC®-INT and HPC®-HT is a single component water-based coating designed to insulate hot pipes or surfaces that load up to 650°C. The coating is not a reflective coating but an insulation coating and works to block or hold the loading of higher heats and to resist the transfer of heat through the coating to the cooler side. Holds heat in the surface in which it covers. Once coated, the surface should be equal to the interior temperature. HPC®-HT has been successfully applied to hot pipe surfaces around 650°C. Learn More >
HSC® – Hot Surface Coating
Get “High” Heat Protection that Surpasses Conventional Insulation
HSC® Coating – single component water-based coating designed to insulate hot pipes or surfaces that load up to 350°F. The coating is not a reflective coating, but works to block the absorption of heat and to resist the transfer of heat through the coating to the cooler side > Learn More >
Sunshield
More than just a Heat Reflective White Paint – Blocks 85% of Solar Heat
Sunshield – single component water-based heat reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. As a consumer coating it lasts 10 years but does a great job of repelling the initial radiation heat on the surface it covers. Learn More >
Omega Fire
Omega Fire™ is a single component coating designed to withstand 1200°C
Omega Fire™– single component coating designed to withstand 1200°C (2200°F) direct flame and resist heat transfer to backside. This coating has not obtained UL certification as yet, but has performed many of the UL testing profiles to verify its’ capabilities. Adjustments have been made after all the initial testing to perfect its performance, and initial beam testing is scheduled for August 2019. Some initial testing along the way have given up to 7-hour fire rating performance and passed the NYC 2-hour support beam testing as well as fire protection for shipping containers > Learn More >
