Rust Grip®-E- (Epoxy) same as Moist Metal Grip except with added metallics for toughness and heat.Learn More >

HPC® HT Coating- two component coating designed to be sprayed directly to hot surfaces while in operation and to insulate hot pipes or surfaces that load up to 450 to 1112 degrees F. HPC®-HT Coating mixes a large water-based Part A with a flammable smaller Part B that becomes non-flammable when ready to use and spray. The resins must be sprayed while the surface is hot to achieve dry down and full curing.Learn More >

SP Liquid Membrane®- single component true rubber coating sprayed or rolled to offer water protection and provide flexibility over surfaces that move by expansion and contraction – roofs, pipes, etc.Learn More >

Rust Grip®- single component urethane formula applied directly to rust or blasted metal surfaces. 6780 psi surface tensile strength. Pull test results in the field and lab average 1200 psi and in the field over blasted surface at 2200 psi. Extremely tough, anchors itself inside the pores of the metal surface or surface rust to block moisture and air from developing corrosion. Simple to use and extremely effective against all corrosive environments. Applied only to completely dry surfaces.Learn More >

Moist Metal Grip- two component epoxy formula for corrosion control over condensating or wet surfaces of any kind. Moist Metal Grip can be applied by brush or roller to force the coating into the surface pores, to replace the moisture or water, and to lock down and prevent the combination of moisture and air to allow corrosion to exist or continue. Available in clear, white, and custom colors.Learn More >

HSC™ Coating- single component water-based coating designed to insulate hot pipes or surfaces that load up to 350 degrees F. The coating is not a reflective coating, but works to block the absorption of heat and to resist the transfer of heat through the coating to the cooler side.Learn More >

HPC® Coating- single component water-based coating designed to insulate hot pipes or surfaces that load up to 500 degrees F. The coating is not a reflective coating, but works to block the loading of higher heats and to resist the transfer of heat through the coating to the cooler side. Holds heat in the surface in which it covers. Always ask what the temperature inside the unit is and not the heat on the surface. Once coated, the surface will be equal to the interior temperature which could be 200-300 degrees F higher than what is registering on the exterior.Learn More >

Enamo Grip SAS- two component urethane top coat with extreme toughness and a non-stick, slick surface that resists attachment of contaminants, graffiti, and other substances to its surface. Many uses from marine to industrial funnels and bag houses.Learn More >

Enamo Grip- two component urethane top coat for color and UV protection with industrial strength to guard against chemical splash and acid rain. Enamo Grip provides an automotive-type coating finish with self-leveling properties. Available in clear and custom colors.Learn More >