Rust Grip®-E- (Epoxy) same as Moist Metal Grip except with added metallics for toughness and heat.Learn More >
SP Seal Coat- single component water-based coating used as a top coat over Super Therm®, HPC® Coating, or other base materials to seal the surface for moisture protection. It remains flexible and is resistant to mold and mildew.Learn More >
SP Seal Coat HT- single-component water-based coating used as a top coat over HPC® Coating or other base materials to seal the surface for high heat temperatures up to 500 degrees F and for moisture protection. It remains flexible and is resistant to cycle water sprays.Learn More >
HPC® HT Coating- two component coating designed to be sprayed directly to hot surfaces while in operation and to insulate hot pipes or surfaces that load up to 450 to 1112 degrees F. HPC®-HT Coating mixes a large water-based Part A with a flammable smaller Part B that becomes non-flammable when ready to use and spray. The resins must be sprayed while the surface is hot to achieve dry down and full curing.Learn More >
Super Therm®- single component water-based coating for exterior surfaces to block and repel 95% of the radiation heat (UV, Short Wave and Long Wave) and to prevent heat load into the initial surface or envelope of the building or structure. Uses four ceramic compounds designed to match the heat waves from the sun. Used in oil fields and heavy industrial as well as commercial. Has 18 to 20-year life application histories showing no more than 10% loss of performance even after becoming dirty and weathered. Not just a reflective coating. Applied at only 10 mils (thickness of a credit card or business card) to face the sun and prevent the radiational heat from loading onto the surface.Learn More >
Super Base- single component water-based coating used over roofing as a base coat before applying Super Therm®. Used to fill and seal cracks and breaks in the roof substrate. Must have some pitch on the roof and no ponding areasLearn More >
Sunshield- single component water-based reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. Not as long lasting as Super Therm®, but does a great job of repelling the initial radiation heat on the surface it covers.Learn More >
SP Liquid Membrane®- single component true rubber coating sprayed or rolled to offer water protection and provide flexibility over surfaces that move by expansion and contraction – roofs, pipes, etc.Learn More >
Rust Grip®- single component urethane formula applied directly to rust or blasted metal surfaces. 6780 psi surface tensile strength. Pull test results in the field and lab average 1200 psi and in the field over blasted surface at 2200 psi. Extremely tough, anchors itself inside the pores of the metal surface or surface rust to block moisture and air from developing corrosion. Simple to use and extremely effective against all corrosive environments. Applied only to completely dry surfaces.Learn More >
Moist Metal Grip- two component epoxy formula for corrosion control over condensating or wet surfaces of any kind. Moist Metal Grip can be applied by brush or roller to force the coating into the surface pores, to replace the moisture or water, and to lock down and prevent the combination of moisture and air to allow corrosion to exist or continue. Available in clear, white, and custom colors.Learn More >